Most backyard sauna problems happen before the sauna arrives: a spot that’s too tight, an HOA that says no, or a heater that needs a circuit nobody planned for. This guide goes through the decisions in the order you’ll face them, and ends with a checklist to run through before you order.
Step 1: Measure your yard and choose a backyard sauna spot
Grab a tape measure and sketch the yard. Compare the open space with each model’s full outside dimensions, including any porch, roof overhang or chimney that sticks out past the walls.
You want ground that’s level, or can be made level, for the base your model calls for. Leave room for the door to swing all the way open. If the fit is tight, ask for the model’s dimensioned drawing before you commit.
Then picture the walk out there in February. The far corner of the lawn looks great in July and feels a lot farther away in sleet. Plan a real path with some lighting, and check what the neighbors can see through the glass.
For a closer look at placement and foundation planning, read how to choose the perfect spot for an outdoor sauna. Spray-paint the footprint on the grass and live with it for a few days.
Step 2: Check HOA rules and local setbacks before buying
If you have an HOA, read the covenants before you pick a model. They can limit accessory structures, what’s visible from the street, colors and roofing. If you need approval, get it in writing first.
Then call your city or county building department. Ask about setbacks from property lines, height limits, and whether a sauna of your size needs a permit. Small doesn’t automatically mean exempt.
Denver’s guide to residential sheds and accessory structures and Seattle SDCI’s shed permit page show how two cities handle small backyard structures. They’re examples only. Your town’s rules may be different, so confirm with your own building department.
Our guide to code requirements for installing an outdoor sauna has more on what to ask. Bring the location, the outside dimensions and the heater type when you call.
Step 3: Choose between electric and wood-burning heat
Decide on the heater before you lock in the spot, because it changes what the site needs. Electric heaters for outdoor saunas usually need a dedicated 240V circuit sized to the heater maker’s manual, run by a licensed electrician. Have them look at your panel and the trench route to the sauna early.
That work often needs a permit and an inspection. The Colorado State Electrical Board’s permit information and Washington State L&I’s electrical permit guidance are two examples; your electrician will know who issues permits where you live.
A wood-burning stove skips the circuit, but it brings a chimney with clearances set by the stove maker, a dry woodpile and somewhere to dump ashes. Run the chimney plan by your building department too.
Also check for burn bans. In the Puget Sound area, for example, the Puget Sound Clean Air Agency can call bans that affect wood-burning appliances. Many other areas have similar rules, so ask your local air agency.
Read our guide to installing outdoor saunas, and compare sauna heaters by the room size each one is rated for. Infrared is a separate category and mostly an indoor choice. If you’re also considering a steam enclosure, compare steam rooms and saunas to understand their different space and utility needs.
Step 4: Pick a shape that fits your climate and layout
Barrels and cabins (or cubes) are the two main shapes. Look at the floor plans, not just the photos: where the benches sit, how much headroom you get, and how much room the heater takes.
A barrel has curved walls and a curved top. A cabin has straight walls and a flat or pitched roof. Ask what roof covering comes standard on each and what upgrades are offered. For more on insulation and weatherproofing, see our buying guide.
Colorado: Review snow and strong sun
Colorado brings heavy snow some winters and hard sun the rest of the year. Ask about roof options and how the maker says to protect the exterior from UV, and check with your building department whether a snow-load requirement applies. More on outdoor saunas in Colorado.
Washington State: Plan for long wet seasons
In western Washington State the issue is months of damp. Pick a roof that covers the whole structure, keep the base raised off the ground, leave air space around the walls, and make sure runoff doesn’t land at the door. See outdoor saunas in Washington State.
What about backyard sauna cost? It depends on size, wood and heater, so check the product pages for the models you like. Remember to add the base, the electrical work and assembly help to your own budget.
Step 5: Plan freight delivery and assembly
Saunas ship by freight and arrive by liftgate at your address. Unless your order says otherwise, delivery doesn’t include moving the crates into the backyard (see our shipping policy). Line up a few helpers, and measure gates and tight turns between the driveway and the pad.
Delivery generally takes 4–16 weeks; check the lead time on each product page. A 50% deposit is due when you order. Use the wait to get the base built and the electrical roughed in.
A backyard sauna kit like the Leisurecraft barrels takes about 6–12 hours for two people with minimal tools. Read the manual for your model before the crates show up.
Backyard America doesn’t install saunas, but we can help you find an installer and give you expert support by phone. Call 888-596-4403.
Step 6: Add the details that make daily use practical
The best backyard sauna ideas are small ones. Put hooks or a little changing nook by the door and a towel rack where rain can’t reach it. A bench outside gives you somewhere to cool off and pull your shoes back on. If you want to add a plunge tub, our sauna and cold plunge planning guide covers equipment and layout.
An outdoor shower is nice to have; check with your building department before you plumb one. Add path lighting, and give the bucket and ladle a home. Follow your heater maker’s instructions on using water on the stones.
Step 7: Review your pre-purchase checklist
Before you order, make sure you can check these off:
- Measure the full exterior footprint, roof projections and door-opening space.
- Select level ground and confirm the model’s foundation instructions.
- Plan winter access, privacy and a lit walking path.
- Read HOA covenants and obtain written approval if required.
- Confirm setbacks, height limits and permit questions with your building department.
- Review electric heater requirements with an electrician, or confirm stove clearances and local burn restrictions.
- Compare interior layouts, roof options and climate-related questions.
- Check product-page details, lead time and the deposit requirement.
- Arrange crate access, help moving materials and assembly.
- Choose locations for hooks, towels and other items without blocking access.
Once you’ve worked through the list, browse outdoor saunas and barrel saunas to compare models, or request a quote with your size, heater and ZIP code.