Your sauna foundation determines how the sauna sits, how water drains around it and how well the bottom boards stay clear of wet ground. Choose the spot first, then match the base to the sauna you want to buy. You can prepare the site yourself or hire a local contractor. Either way, follow the maker’s instructions for your model.
Choose the spot before planning the base
To choose a spot for your outdoor sauna, walk the route from your house to the proposed location. Where will you change and leave your shoes? How will you reach the door in winter? A spot that looks convenient from your window can feel different when you’re walking through snow or standing water.
Look at privacy from neighboring windows and the view from the sauna’s door or windows. Then work through the practical details: the door approach, the delivery path and the route for power or a chimney. As you compare outdoor saunas, use each model’s footprint and door location to picture how it’ll fit in your yard. If you also want a plunge tub, our sauna and cold plunge planning guide covers space for both.
Watch for low spots and places where water collects after rain or snowmelt. LeisureCraft calls for a flat, stable, well-drained surface. Before you pick a base material, make sure the location can meet those requirements.
Before you commit to a spot, ask your local building department and HOA: What setbacks apply? Is approval required? Are there restrictions affecting the heater or chimney location? Use our guide to outdoor sauna code requirements to prepare for those conversations.
Most outdoor electric models need a dedicated 240V circuit. Have a licensed electrician review the heater manual’s requirements before you choose the final location. Our guide to sauna electrical requirements covers this part of the job. A wood-burning heater needs no circuit, but you’ll need to follow the chimney clearances in the stove maker’s manual.
Sauna foundation options for your yard
The right outdoor sauna foundation depends on your model and your site. LeisureCraft lists concrete, compacted crushed gravel, patio stones on gravel and wooden decks as suitable surfaces in its outdoor sauna guide. Read your sauna’s instructions before you choose a base so you know what that model needs.
Concrete pad
LeisureCraft describes a 4-inch concrete slab as the most permanent option and its preferred choice for cube saunas with insulated floors. If you’ve chosen that style, concrete is a good place to start. Give your contractor the model’s footprint and instructions, and go over any local requirements before the work begins.
Compacted gravel
LeisureCraft recommends 3/4-inch clear stone compacted to 4 inches for barrel and cabin saunas. It drains naturally and is easy to level. If you’re comparing barrel saunas, pay attention to the cradles that support the barrel. Each cradle needs to sit evenly and level on the prepared surface.
Pavers on a gravel base
Patio stones on a gravel base are another option LeisureCraft accepts. If you want a paved surface under your sauna, this approach may suit your yard. The work underneath matters, too: the stones need a flat, stable base. Go over leveling and drainage with the person preparing the site before the stones go down.
Wood deck
A wooden deck can work, according to LeisureCraft. If you want the sauna beside an existing deck area, you’ll need to know if that location can support your chosen model. Give your contractor or local building department the sauna’s details and ask them to review the deck before you use it as a base.
Compare the four base options
| Base | Good for | Drainage | Notes |
|---|---|---|---|
| Concrete pad | Cube saunas with insulated floors | Plan where water will shed away | LeisureCraft recommends a 4-inch slab as its most permanent option |
| Compacted gravel | Barrel and cabin saunas | Drains naturally | 3/4-inch clear stone compacted to 4 inches |
| Pavers on gravel | A sauna location with a paved surface | Allow for drainage around the finished base | Patio stones need a flat, stable gravel base |
| Wood deck | A planned or existing deck location | Make sure water won’t collect underneath the sauna | Have the support reviewed for your model |
Build a gravel base step by step
A gravel sauna foundation needs stability, level support and drainage. The steps below follow LeisureCraft’s guidance. Keep your model’s instructions handy as you work, and use them for details about its floor or cradles.
- Choose a location where you can create a flat, stable, well-drained surface. Don’t set the sauna directly on grass or bare soil.
- Make the base a little larger than the sauna’s footprint. LeisureCraft recommends this to keep the bottom boards out of puddles and snowmelt.
- Use 3/4-inch clear stone. This is the crushed gravel LeisureCraft specifies for barrel and cabin sauna bases.
- Compact the stone to 4 inches and level the supporting surface. Make sure the prepared base is level before positioning the sauna.
- For a barrel sauna, set the cradles evenly and level on the base. Follow the model’s instructions for each cradle’s placement.
- Look at how water leaves the door area. LeisureCraft recommends a slight slope away from the door while maintaining level support for the sauna.
LeisureCraft’s outdoor sauna maintenance guide emphasizes keeping standing water away from outdoor wood structures. When you review the finished sauna base, look for places where water could collect, especially around the edges and entrance.
Account for snow, rain and seasonal conditions
For a Colorado site, talk with your contractor about snow and freeze-thaw conditions. Walk the winter route and look for places where snowmelt collects. Read our Colorado outdoor sauna guide for more on planning your site, and ask your local building department which frost and snow requirements apply.
On the west side of Washington State, pay close attention to rain and drainage when choosing your location. Walk the yard after wet weather to see where water goes before you commit to a spot. Our Washington State outdoor sauna guide covers more planning details. Ask locally about applicable frost and snow requirements.
Our guide to planning for an outdoor sauna in winter also covers seasonal access. Include the entrance and the route from your changing area in your site plan.
Plan delivery and assembly access
Delivery is by liftgate truck to the curb or driveway. Before you order, trace the path from that drop-off point to the prepared base. Look at gates, turns and anything else along the route, then read the delivery information for your chosen model.
Delivery generally takes 4–16 weeks; check the lead time on each product page. LeisureCraft-type kits take 6–12 hours to assemble with two people and minimal tools. As you compare LeisureCraft outdoor saunas, use the product’s current lead time to schedule base preparation and any local help you’ll need.
Backyard America doesn’t install saunas, but we can help you find an installer and give you expert support by phone. Call 888-596-4403 to talk through your model and site questions. See our sauna project support services for setup documents, installer referrals, and warranty help.
Frequently asked questions
Can a sauna sit on grass?
No. LeisureCraft says never to place a sauna directly on grass or bare soil because moisture wicks into the wood. You’ll need to prepare a suitable base first.
How thick should a concrete pad be?
LeisureCraft recommends a 4-inch slab for a concrete sauna foundation. Before you pour, review your model’s instructions and the local requirements that apply to your site.
Does a deck work?
Yes, LeisureCraft lists wooden decks as an option. Your deck needs to support the sauna you choose and give it a flat, stable surface.