5 min read

Infrared vs Traditional Sauna: Power, Heat and Fit for Your Home

The real split in infrared vs traditional sauna is how the heat gets to you. A traditional sauna heats the air with an electric heater or wood stove and a load of stones. Infrared panels warm you and the surfaces around you directly. Traditional saunas let you ladle water onto hot stones for steam; infrared cabins have no stones and do not take water on a heater. For most homes the decision comes down to four things: the electrical service you have, the space, indoors or out, and whether you want steam.

How Each Type Heats

Traditional: a heater, stones, and heated air

A traditional sauna uses an electric heater or wood stove with a load of stones. The heater warms the stones and surrounding air. You can ladle water onto the stones for a burst of steam, following the heater maker’s instructions.

The heater has to suit the room. Size it by room volume and the heater maker’s chart, not by how many people the sauna seats. Browse sauna heaters alongside the room you are considering, and check which models the sauna maker recommends.

Infrared: panels that heat directly

Infrared saunas use carbon or ceramic emitters to warm you and the surfaces directly. There is no stone compartment, and you do not pour water onto the panels. Most infrared saunas we sell are cabinets designed for indoor placement.

If you have searched “infrared sauna vs sauna,” the second term usually means a traditional sauna. Infrared is still a sauna category, but its heating equipment, temperature controls, and water restrictions are different.

Infrared vs Traditional Sauna at a Glance

These figures are examples from models we sell, not specifications for every sauna. Use the exact model’s manual when planning your purchase and electrical work.

FeatureTraditional (electric or wood)Infrared
Heat sourceElectric heater or wood stove with stones; heats the air.Carbon or ceramic panels warm you and surfaces directly.
Typical power, examples from models we sellElectric examples include 6 kW at 240V, 7.5 kW, and recommended 8 or 9 kW heaters at 240V. A wood stove needs no electrical circuit.FD-2: 1,750 watts, 120V/15A. FD-3: 3,150 watts, 240V/15A. Other examples require 20A service.
Top temperatureDepends on the heater and room. Harvia’s wood-stove manual cautions that temperatures above 212°F are generally too high in a sauna.Examples have maximum settings of 149–170°F, depending on the model.
Warm-upDepends on heater size and room volume. Check the heater manual.Finnmark says the FD-2 reaches 170°F in under an hour.
SteamYes, by ladling water onto stones according to the heater instructions.No. Do not apply water to the panels.
FootprintOutdoor barrels and cabins need a suitable pad outdoors.Small 1–2 person cabinets are about 4 x 4 feet. Confirm the selected model’s dimensions.
Outdoor suitabilityOutdoor saunas are almost always traditional, with electric or wood heat.Most cabinets we sell are indoor rooms. Confirm any outdoor rating with the manufacturer.

Electrical Needs: 120V Plug-In or 240V Connection?

In an infrared sauna vs traditional sauna comparison, don’t assume every infrared cabinet plugs into a regular outlet, or that every 240V sauna is hardwired. Requirements come from the maker’s manual and your applicable electrical code. Send the spec sheet to your electrician before you pick a spot.

Infrared outlet requirements vary

The Finnmark FD-2 is a 2-person infrared cabinet that plugs into a standard 120V/15A household outlet using a NEMA 5-15P plug. It draws 1,750 watts and has a maximum temperature of 170°F. Have a licensed electrician check that the circuit you plan to use can handle it.

The Finnmark FD-3 seats 3–4 people and needs a 240V/15A outlet with a NEMA 6-15P plug. Its power rating is 3,150 watts, with a maximum temperature of 170°F. So a 240V sauna can still be a plug-in. Voltage alone won’t tell you whether it needs hardwiring.

Other infrared models have different requirements. A 2-person far infrared cabinet we sell has a 64–149°F setting range and calls for a 20-amp outlet and breaker installed by a certified electrician. INFRA-CORE MAX models list dedicated 120V/20A electrical requirements. Our infrared sauna buying guide can help you compare models before checking their manuals.

Traditional electric and wood options

Traditional electric heaters usually mean a planned 240V circuit. Check whether your heater is hardwired and what breaker size it calls for. A Leisurecraft cedar barrel can be paired with a 6 kW 240V electric heater or a wood-burning heater. Our 7-foot-diameter knotty cedar barrel recommends a 240V 8 or 9 kW electric heater on most sizes; Leisurecraft recommends 7.5 kW for the CT Elation barrel.

If you are comparing HUUM sauna heaters, match the selected heater’s room-sizing guidance and wiring instructions to your sauna. Don’t borrow circuit specs from another brand or a heater that just looks similar.

The National Electrical Code (NFPA 70) has a section for fixed sauna heaters, and each state adopts its own edition. Your licensed electrician and local building department can tell you which edition applies, any amendments, and whether you need a permit. Two places to start: the Colorado State Electrical Board permit page and Washington State L&I electrical permit guidance. Other states have their own offices, so ask which one covers your address.

A wood-burning sauna stove needs no electrical circuit, but it needs stove clearances and a chimney according to the stove maker’s instructions. Ask your local building department about approval for the proposed stove and chimney arrangement before ordering.

Which Fits Your Home?

Start with the spot you can actually use, then hold each model’s dimensions, wiring and install instructions up against it.

  • You have an indoor spare room: Start with an indoor infrared cabinet. Measure the floor space, ceiling height, doorway, and delivery route. Check the manual for required clearance around the cabinet.
  • You want a sauna in the yard: Start with outdoor saunas, which are almost always traditional. Plan the pad and access route, then confirm placement questions with your local building department and HOA, if applicable.
  • You want steam or löyly: Choose a traditional heater with stones. An infrared cabinet does not provide the same water-on-stones experience.
  • You rent or lack a suitable 240V connection: Look at a 120V plug-in such as the FD-2, as long as the circuit checks out and your landlord agrees. A plug-in cabinet still needs a location that meets its manual’s requirements.
  • You want a wood fire: Look at a traditional wood-burning model. Check the stove’s clearances and chimney instructions before deciding where it will go.
  • You want both heating methods: Combination units exist. Finnmark’s FD-6 cedar barrel combines infrared panels with a traditional rock heater. Go by the combo unit’s own manual, not the specs of a standalone infrared cabinet.

For an outdoor project, our guide to planning an outdoor sauna installation walks through the site work. Ask your local building department and HOA about setbacks, permits, and any applicable snow-load requirements for your chosen structure.

Steam Rooms Are a Separate Option

A steam room is a sealed, tiled room supplied by a steam generator. It differs from both an infrared cabinet and a traditional sauna where you ladle water onto stones. If that is the room you have in mind, read our steam room vs sauna comparison before planning the space.

Not sure which one your house can support? Call us at 888-596-4403 and we’ll go through the specs with you.

Add a Comment

You must be logged in to post a comment

Shopping Basket

Backyard America

GET VIP PRICING & MORE WITH BYA CLUB!

Join Backyard America's VIP Club, free for a limited time! Be the first to know about exclusive offers, pricing and savings.

Your FREE BYA Club Membership Includes: