There isn’t one best wood for sauna building. The right answer depends on three things: whether the sauna is indoors or outside, which part of it you mean, and your climate. The outside skin of a barrel in Seattle has a very different job from the bench you sit on.
Choosing the Best Wood for Sauna Walls, Benches, and Exteriors
Most saunas use more than one wood. A cedar sauna might have knotty cedar walls and clear cedar benches. A thermowood sauna might pair a thermo-spruce shell with thermo-aspen benches. So read the spec sheet part by part, not just the headline wood.
Western red cedar
The classic North American sauna wood. It’s reddish-brown, smells like cedar, and holds up outdoors because it naturally resists moisture and decay. It comes in knotty and clear grades, and the grade matters most on benches.
Eastern white cedar
Paler and milder-smelling than red cedar, with similar natural resistance outdoors. A good pick if you want a light-colored sauna.
Thermally modified wood
Thermally modified wood is ordinary softwood cooked with heat and steam, with no chemicals added. It comes out darker, steadier in changing humidity and low in resin. Thermo-spruce and thermo-pine show up on exteriors; thermo-aspen is common on benches and backrests.
Nordic spruce and pine
These are the old Finnish standbys for walls and outside cladding. They’re affordable and light in color. The downside is knots, which can weep sticky resin when they get hot, so you don’t want them right by the heater or under your back. Don’t confuse plain spruce or pine with the thermo versions.
Aspen and alder
Both are pale, smooth and low in resin, which is why so many makers use them for benches and backrests, the parts your skin actually touches.
Hemlock
Pale, nearly scentless and low in resin, so it’s popular in indoor rooms. Untreated hemlock doesn’t resist rot, though. Keep it indoors.
Red Cedar vs. White Cedar
Both are real cedars for outdoor use. A red cedar sauna is darker and smells more like cedar, and it has the longest track record outdoors. White cedar is lighter, milder, resists weather about as well and usually costs less, according to LeisureCraft’s guide to cedar, hemlock and thermowood.
So it mostly comes down to looks and smell. If you picture a honey-colored barrel, look at red cedar. If you’d rather have a pale, Scandinavian look, white cedar fits. Either way, check the bench grade.
Match Outdoor Sauna Wood to Your US Climate
An outdoor sauna spends most of its life sitting empty in the weather, so the best wood for sauna exteriors depends on what your weather does to wood. In every region, cedar and thermo-treated spruce or pine are the usual choices. What changes is the care.
| Climate | What the wood faces | Good fits | Extra care |
|---|---|---|---|
| Colorado and the dry, high-altitude Mountain West | Strong UV that fades and grays exterior wood faster, plus dry air | Red or white cedar; thermo-spruce or thermo-pine exteriors | Use maker-approved, UV-protective penetrating exterior oil if you want to retain the color. |
| Washington State west of the Cascades and the wet Pacific Northwest | Long damp seasons and slow drying | Red or white cedar; thermo-spruce or thermo-pine exteriors | Consider a roof overhang, allow airflow, and keep wood off the ground. |
| Humid Southeast summers | Heat plus humidity, with mold risk if the sauna is not aired out | Red or white cedar; thermo-spruce or thermo-pine exteriors | Keep airflow available and let the sauna dry with the door open after use. |
| Cold Upper Midwest and Northeast | Freeze-thaw conditions and snow | Red or white cedar; thermo-spruce or thermo-pine exteriors | Keep wood off the ground and allow airflow and drying between uses. |
In Colorado, the sun is the main thing. Decide early whether you’ll let the exterior go silver or keep oiling it. Our page on outdoor saunas in Colorado covers models and planning for the state.
West of the Cascades, wood rarely gets a chance to dry, so a roof overhang, a raised base and air moving around the walls do more than any finish. See our Washington State outdoor sauna guide.
In snow country, read up on using an outdoor sauna in winter, and ask your local building department whether a snow-load requirement applies to your structure.
Inside and Outside Have Different Wood Requirements
Walls and ceilings
Inside walls go hot and cold, wet and dry, every session. Cedar, spruce and thermo woods all work here. A few tight knots in a wall are fine; just avoid resin-heavy boards near the heater.
Benches and backrests
Anything you sit or lean on should be smooth, knot-free and low in resin. Aspen, alder, thermo-aspen and clear cedar all fit. This is the one spot where it’s worth paying for an upgrade.
Exterior boards and shingles
The shell takes rain, sun and snow all year. Cedar or thermo-treated spruce and pine handle it best, but placement counts as much as species: keep the wood off the ground, give it a roof edge and let air move around it.
Care and Finishes: Follow the Maker’s Instructions
LeisureCraft’s care guide says to leave interior cedar bare or use only a penetrating oil made for sauna interiors. Never paint, varnish, seal, or apply ordinary stain inside. Do not use bleach or harsh cleaners on cedar.
Outside, untreated cedar weathers to silver-gray. That color change does not hurt the wood. To retain its original color, LeisureCraft recommends a penetrating exterior oil with UV protection, recoating when the color fades.
For barrel saunas, LeisureCraft’s manual calls for retightening the bands after about the first month of use and then every six months. Your own manual has the final word.
SaunaLife includes natural paraffin oil with its sauna kits for treating the wood, with its own instructions. Don’t assume cedar advice carries over to other woods, or that an exterior oil is safe inside.
Use our outdoor sauna maintenance tips alongside your model’s manual to plan routine care.
What Backyard America’s Saunas Are Made Of
Here’s what the brands we carry use, from their product pages:
- Leisurecraft Dundalk barrel and cabin saunas use knotty red cedar. Clear cedar is available as an upgrade on some models.
- Leisurecraft CT collection models, including the CT Elation barrel and CT Avalon, use eastern white cedar.
- Pure Cube Trinity uses clear Western red cedar.
- SaunaLife outdoor saunas use thermo-spruce or thermo-pine exteriors with thermo-aspen benches and backrests. Its indoor kits come in spruce, aspen, alder, hemlock, cedar, and thermo woods.
- ThermaSol’s Fortis cabin uses brushed thermo-spruce and pine outside, with thermo-aspen inside.
- Iglucraft uses spruce shingles outside and aspen inside.
Sauna Wood FAQ
What is the best wood for a sauna?
For an outdoor shell, cedar (red or white) or thermally modified spruce or pine. For benches, smooth low-resin wood like aspen, alder or clear cedar. For an indoor room, almost any of the sauna woods above works.
Is cedar or hemlock better for a sauna?
Outdoors, cedar, because untreated hemlock doesn’t resist rot. Indoors, it’s a matter of taste: hemlock is pale and nearly scentless, cedar is darker and aromatic.
Can you use pine in a sauna?
Yes, for walls and cladding. Keep knotty pine away from the heater and off the benches, since hot knots can weep resin. Thermo-pine is more stable and lower in resin than plain pine.
Should you seal or stain sauna wood?
Follow your sauna maker’s instructions. LeisureCraft says to leave interior cedar bare or use a penetrating sauna-interior oil, never paint, varnish, sealer, or ordinary stain. Exterior cedar can weather naturally or receive a penetrating exterior oil with UV protection.
What wood is best for sauna benches?
Aspen, thermo-aspen, alder and clear cedar. They’re smooth, knot-free and low in resin.
Ready to compare models? Browse our barrel saunas and outdoor saunas, or call 888-596-4403 and we’ll talk through the wood options on any of them.