6 min read

How to Clean a Sauna: An Outdoor Sauna Care Schedule

Here’s how to clean a sauna on a schedule you can keep: dry the room after every use, wipe surfaces with warm water and a mild, sauna-safe cleaner every week or two, and give the interior a thorough wash at least twice a year. LeisureCraft recommends drying the room and wiping it down regularly. Harvia calls for a thorough wash at least every six months. If you own an outdoor sauna, add seasonal inspections of the shell and roof, plus annual heater maintenance. Your sauna and heater manuals take priority whenever their instructions differ from this general schedule.

After every session: dry the room and empty the bucket

A few quick tasks after each session make cleaning easier later. LeisureCraft recommends opening the door and vents after use and wiping benches dry. Harvia recommends using seat towels to keep perspiration off the benches.

  • Take out your seat towels and wipe the benches dry.
  • Open the door and adjustable vents so the wood can dry, following LeisureCraft’s guidance.
  • Empty the bucket after every use, as Harvia directs. Leave no standing water to freeze inside during cold weather, following LeisureCraft’s winter guidance.

If dampness keeps coming back, look at your sauna ventilation before reaching for more cleaning products. Stick with this drying routine even when you only use the sauna occasionally.

How to clean a sauna step by step

Give your sauna a cleaning every week or two. LeisureCraft recommends warm water and a mild, sauna-safe cleaner, working with the wood grain. For the thorough wash at least every six months, the Harvia Spirit manual specifies a scrubbing brush and sauna cleanser, followed by a clean-water rinse.

Let the heater cool before you clean. HUUM requires disconnecting power before heater maintenance. Switching the heater off at its controls doesn’t meet that requirement; disconnect the power before you start maintenance.

  1. Benches: Follow LeisureCraft’s method: wipe along the grain with warm water and mild sauna-safe cleaner. Wipe away the residue and let the wood dry. Use Harvia’s brush-and-cleanser method when it’s time for the scheduled thorough wash.
  2. Walls: Use LeisureCraft’s same gentle cleaning method and work along the grain. Include the backrests and other areas you touch regularly. Give the room time to dry when you’re done.
  3. Floor: Harvia directs owners to vacuum or sweep, then wipe with a damp cloth. Get the loose dirt up before you add water.
  4. Heater exterior: Harvia specifies a damp cloth. For lime stains on its heater, Harvia permits a 10% citric acid solution followed by rinsing. Follow your model’s instructions and keep liquids away from electrical components.
  5. Stones: Follow the inspection schedule in your heater manual. Stones need their own maintenance routine. HUUM DROP has specific hour-based inspection and replacement intervals, covered below.
  6. Bucket: Harvia says to dump the water after every use. It also specifies clean tap water for the stones, never pool or spa water.

Store your brush and suitable cleaner together so they’re ready when you need them. You can also browse our guide to sauna accessories for the items you use around the room.

Handle stains, mold and odors without harsh cleaners

Knowing how to clean a sauna means knowing when to stop scrubbing, too. For perspiration stains, Harvia recommends light sanding with fine sandpaper. LeisureCraft specifies 120–220 grit, worked along the grain, followed by wiping away the dust.

For mold, LeisureCraft recommends drying the room out, then using a non-bleach remover or diluted vinegar and rinsing. Its cedar-care instructions rule out bleach, ammonia and harsh disinfectants. Read the product instructions before you apply a cleaner to your sauna’s interior.

If you notice an odor, inspect the room for damp areas and review how you’re drying it after use. LeisureCraft emphasizes keeping vents clear and improving airflow when moisture persists. If you keep cleaning the same spot, look for the source of that moisture.

Maintain the heater and stones on their own schedule

Give heater maintenance its own reminders on your calendar. You can use our sauna heaters collection to help identify the equipment you own, then get the matching manufacturer manual for the maintenance instructions.

Electric heaters

LeisureCraft recommends loosely stacked stones and brushing dust off the elements annually, with the power off and the heater cool. It says never to use water or cleaners on the elements. Read the heater maker’s instructions before you touch or move components, and leave electrical repairs to a licensed professional.

The HUUM DROP manual calls for stone inspection after 100 hours of use or at least annually. It specifies rearranging stones and replacing broken ones after 200 hours, then replacing all stones after 400 hours. Always disconnect power before maintenance. If you own one of our HUUM sauna heaters, use your exact model’s manual to get its maintenance schedule.

Wood-burning heaters

LeisureCraft recommends emptying ash before each fire, burning dry seasoned hardwood, and cleaning heating surfaces every 15–20 uses. It also calls for chimney inspection and cleaning at least once a year. Keep a record of uses so you know when cleaning is due. Leave chimney repairs to a licensed professional.

Inspect the exterior from roof to base

Your outdoor sauna’s exterior needs attention, too. The LeisureCraft maintenance guide allows exterior cedar to weather silver-gray or receive a penetrating exterior oil with UV protection. Apply oil on a dry day above about 45°F, following its guidance and the finish instructions. LeisureCraft suggests recoating roughly every couple of years.

Before you bring an exterior finish inside, read your maker’s instructions for interior care. Our comparison of outdoor sauna materials explains the materials, but your maker’s instructions should guide which products you put on the wood.

For its barrel bands, LeisureCraft specifies tightening with a 3/4-inch wrench after the first month, then checking each spring and fall. If you own one of our barrel saunas, follow your own maker’s procedure for tightening the bands.

Roof care depends on the covering. LeisureCraft specifies mild soap and a soft brush for EPDM, with no solvents. For shingles, clear debris. For metal, rinse and inspect the seams. While you’re there, look over the door seal and the drainage around the base. Ask the maker about a seal that needs attention or water collecting around the base.

Use a seasonal outdoor sauna maintenance schedule

Keep up the after-use and weekly routines all year. Use this table for seasonal weather checks and two reminders for Harvia’s thorough washing schedule. Adjust the timing to suit your local conditions.

SeasonTasks
SpringSchedule a thorough wash following Harvia’s guidance. Follow LeisureCraft’s spring band check, inspect the roof, and look over the door seal and base drainage. Complete annual heater tasks and stone inspection if due.
SummerKeep up regular cleaning and drying. If treating exterior cedar, follow LeisureCraft’s dry-weather guidance above about 45°F and the oil maker’s application instructions.
FallSchedule the second thorough wash. Follow LeisureCraft’s fall band check and clear roof debris. Inspect the shell and seals before freezing weather. Arrange the annual chimney inspection and cleaning if due.
WinterFollow LeisureCraft’s guidance to keep the door, vents and chimney clear of snow. Remove heavy roof snow with a non-scratching tool. Leave no standing water inside to freeze.

Before you winterize outdoor sauna equipment, read your model’s winter care instructions. LeisureCraft describes dry-sauna winter preparation as inspecting, tightening, sealing and managing snow. Our guide to outdoor saunas in winter covers more of what to plan for during cold weather.

Not sure what your heater or sauna needs? Call us at 888-596-4403 and we’ll go through the manual with you.

Outdoor sauna cleaning FAQ

Do I need to winterize an outdoor sauna?

LeisureCraft explains that a dry sauna has no pipes or standing water to drain. Winter preparation focuses on inspection, tightening, sealing and snow management. Empty your bucket, keep openings clear, and follow your model’s instructions for seasonal storage or continued use. If your space also includes a plunge tub, our sauna and cold plunge planning guide covers its separate cooling and layout considerations.

Can I pressure wash my sauna?

LeisureCraft recommends a soft brush, mild soap and low pressure, never full blast. Read your sauna’s instructions before you use pressure-washing equipment. For routine interior work, start with its warm-water wipe-down method when deciding how to clean a sauna.

Should I seal the inside?

Harvia doesn’t recommend interior stains or sealers. LeisureCraft says to leave cedar bare or use a clear penetrating sauna oil, never stain, sealer or varnish. Follow your sauna maker’s guidance before you apply any treatment inside.

How often do sauna stones need replacing?

Follow your heater’s schedule. HUUM DROP specifies inspection after 100 hours or at least annually, rearranging and replacing broken stones after 200 hours, and replacing all stones after 400 hours. Log your use so you know when each hour-based task is due.

Comments are closed.

Shopping Basket

Backyard America

GET VIP PRICING & MORE WITH BYA CLUB!

Join Backyard America's VIP Club, free for a limited time! Be the first to know about exclusive offers, pricing and savings.

Your FREE BYA Club Membership Includes: