5 min read

Backyard Renovation Ideas: Add-Ons to Plan Before You Build

The best backyard renovation ideas start with what your yard can support. Before you pick an add-on, find out where power or gas can reach it, what base it needs, and how much clearance the manufacturer calls for. That tells you where each piece can go and which work needs to happen first.

An outdoor renovation gets harder to coordinate if you finish the hardscape before choosing your products. Pick the main pieces early so you can place their connections where you need them. You can still build in stages. Just leave room for the next piece each time you finish a stage.

Backyard renovation ideas, sorted by yard requirements

This table shows what each add-on needs and who usually handles the prep. You’ll still need the product manual for the details. Your local building department can answer permit questions, and your HOA can tell you about neighborhood restrictions.

Add-onNeedsWho usually does the prep
Outdoor saunaFlat, drained base; electric supply or chimney clearance, depending on the modelConcrete or landscape contractor; electrician for an electric model
Cold plungeBase, drain route and any power requirements verified for the selected modelHomeowner, landscape contractor and electrician as needed
Outdoor kitchenPlanned cabinet and appliance layout; gas line or propane for a gas grillConcrete or landscape contractor; licensed gas contractor; electrician as needed
Pizza ovenPlacement and support matched to the oven manual; space for wood storageHomeowner or concrete or landscape contractor
Fire pitLocation with appropriate clearance from combustible materialsHomeowner or landscape contractor
Patio heaterModel-specific power or fuel supply and installation clearancesElectrician or gas contractor, depending on the model
Heated walkway matsWalkway measurements and electrical requirements verified before purchaseHomeowner; electrician for electrical preparation

Choose add-ons before you finalize the layout

Outdoor sauna: choose the heater and base first

With outdoor saunas, your heater choice affects the prep work. Most electric models need a dedicated 240V circuit, as specified in the heater manual. Give that manual to a licensed electrician before you decide where the sauna will sit.

For a wood-burning model, you’ll need to work out chimney placement and follow the stove maker’s clearances. Either type needs a flat, drained base. LeisureCraft lists concrete pads, compacted gravel, pavers on gravel or a deck as base options. Find out which option suits your selected model before you schedule the work.

Cold plunge: plan its position beside the sauna

If your backyard remodel ideas include a sauna and plunge together, mark both footprints before you build either base. Leave the access space each manufacturer specifies. You’ll also need to decide where drained water will go. Take any drainage questions about your property to your local building department.

When you compare cold plunge tubs, look at the equipment along with the size. Glacier and Polar hold 190 gallons and have a garden-hose drain. The Penguin chiller keeps water cold without ice. Icetubs models have a built-in engine that cools and heats water from about 37°F to 100°F. Have an electrician review the power requirements for the equipment you choose.

Outdoor kitchen: choose appliances before placing connections

Start your outdoor kitchen with the appliances you want to cook with. Backyard America carries Jackson Grills and Twin Eagles grills and appliances, along with NatureKast outdoor cabinetry. Once you’ve chosen the pieces, you can finalize cabinet openings and put utility connections where those appliances need them.

Gas grills need a gas line or propane. Have a licensed contractor review the appliance requirements and handle the gas work. For more outdoor kitchen ideas, start with what you want to cook and how that affects the layout. Then talk with your contractors about the base and connections your setup needs.

Pizza oven: leave room for wood and placement

An Alfa Forni wood-fired pizza oven adds a separate cooking station to your yard. These ovens burn seasoned hardwood with under 20% moisture and cook pizza at about 700–800°F. When you sketch the area, give the wood a spot too.

Read your selected oven’s support and clearance instructions before you pick its final position. Adding it beside a kitchen? Lay out both sets of product instructions together so you can account for each appliance. You want a cooking layout that’s convenient and gives every product the space its maker specifies.

Fire pit: let clearance determine the location

Before you compare fire pits, measure the space you have around the proposed spot. NFPA suggests keeping fire pits at least 10 feet from anything that can burn. Ask your building department and HOA about local restrictions, then use the product instructions to work out where yours can go.

The Cozy Heat Cozy Fire wood-burning fire pit has a stone wall between two layers of iron netting that retains and radiates heat. It needs 55 lb of sauna stones, sold separately. Add those stones to your product list so you have them ready for assembly.

Patio heat: choose the heater before preparing its location

If you want patio heat in your outdoor renovation, look at Bromic outdoor heaters before you finalize the utility work. Your selected model will have its own mounting requirements, clearances and power or fuel needs. Give the instructions to the appropriate licensed contractor before they prepare the connections.

Heated walkways: measure the route you actually use

If you’re planning for winter, take a look at heated outdoor mats for walkways. Measure the route from your house to the add-ons you’ll use. Read the mat instructions for placement and electrical requirements, then have an electrician review your planned power source before you order.

Put the work in the right order

Once you’ve narrowed down your backyard renovation ideas, put the work in order. Give each contractor the manuals for the products they’ll prepare for, so they can match the work to what you’ve chosen.

  • Start with utilities and permit questions. Ask your local building department about requirements. Review HOA restrictions and have licensed contractors plan electrical and gas work.
  • Prepare bases and hardscape. Decide where each product will sit before building the surfaces beneath it. Review drainage and the dimensions in each manual.
  • Coordinate deliveries and assembly. Work out who will receive each shipment, move it to its planned location and handle assembly.
  • Finish around the installed products. Before you complete the remaining surface details, make sure you’ve left the required access and clearances.

Plan delivery access before placing your order

Delivery is by liftgate truck, generally within 4–16 weeks. When you set your schedule, check the lead time on each product page. Different items may arrive on different timelines, so line up the prep work with the products you actually order.

You’ll need a clear path from the driveway to each product’s location. Measure gates and narrow passages, then compare those measurements with the delivery information. Before delivery day, work out how you’ll move the shipment from the truck’s drop-off point to where it belongs.

Ready to narrow down your backyard renovation ideas? Call Backyard America at 888-596-4403 or request a quote for the products you’re looking at. Backyard America doesn’t install saunas, but we can help you find an installer and give you expert support by phone.

Add a Comment

You must be logged in to post a comment

Shopping Basket

Backyard America

GET VIP PRICING & MORE WITH BYA CLUB!

Join Backyard America's VIP Club, free for a limited time! Be the first to know about exclusive offers, pricing and savings.

Your FREE BYA Club Membership Includes: