Bromic Gas Mounting Poles suspend your gas heater from the ceiling at the height where it works best, between 8 and 9 feet above the floor.
They fit both the Platinum and Tungsten Smart-Heat Gas collections and come in six lengths, so you can match almost any ceiling height.
Features
- Six lengths: From 9.69″ to 41.18″ to suit low and high ceilings
- Fits both gas collections: Works with Platinum and Tungsten Smart-Heat Gas heaters
- Pitched ceilings: The mounting point adjusts to a sloped ceiling so the pole still hangs straight down
Specifications
| PART # | 9.69″: BH3030003 13.62″: BH3030004 17.56″: BH3030005 25.43″: BH3030006 33.31″: BH3030007 41.18″: BH3030008 |
| COMPATIBLE WITH | Bromic Platinum Smart-Heat Gas and Tungsten Smart-Heat Gas |
| HEATER + BRACKET HEIGHT | 16.6″ |
| RECOMMENDED MOUNTING HEIGHT | 8′–9′ from the floor to the bottom of the heater |
Downloads
FAQs
Can I use these poles with both the Tungsten and Platinum Gas heaters?
Yes. The gas mounting poles fit both the Platinum and Tungsten Smart-Heat Gas collections.
How do I pick the right pole length?
Add the pole length to the heater and bracket height (16.6″), then subtract that from the floor-to-ceiling (or beam) height. The result is the distance from the bottom of the heater to the floor, which should be between 8′ and 9′. Your installer must follow the clearances in the installation manual.
Can the poles be installed at an angle?
No. The pole must hang straight down. The adjustment at the mounting point is only there so the pole can still hang vertically from a pitched ceiling.


