Snow melting mats provide a heated surface for outdoor routes you want to keep clear during snowy weather. They roll out over steps or walkways and plug into an outlet, making them a portable option for managing snow around your home. Here is how they work, where they help most, and what to check before using them.
How Do Snow Melting Mats Work?
Heated outdoor mats use electricity to warm their surface and melt snow. For example, residential HeatTrak mats warm to about 40°F above the surrounding air temperature. That is a temperature difference, not a fixed surface temperature: the mat’s warmth changes with the outdoor air.
Timing matters. According to HeatTrak, flakes melt on contact when its mats are switched on before snowfall. When switched on after snow has accumulated, they melt about 2 inches of snow per hour. Starting early helps keep the covered route clear as snow falls instead of waiting for a layer to build up.
Where Heated Outdoor Mats Help Most
Start by identifying the routes you use regularly. A focused layout can help keep walkways clear between an entrance and the places you need to reach. Match the mat layout to the walking surface, including any steps along the route.
- Walkways: Cover the frequently used path leading to your front door or another entrance.
- Front steps: Use stair mats for the steps along your entry route. HeatTrak walkway and stair mats link with watertight connectors.
- Entrances: Include the outdoor approach to the doorway when planning your layout.
- Backyard routes: Consider the path from your house to a backyard sauna, including steps between the two.
Benefits of Heated Walkway Mats
Heated walkway mats can mean less shoveling on the surfaces they cover. Think of them as help for a specific route: the surrounding driveway, uncovered steps, and other areas still need attention. Choosing the route first makes it easier to decide where mats would be useful.
They can also reduce the need for rock salt on covered concrete and pavers. Using less rock salt can help limit wear associated with salt and freeze-thaw conditions. Mats do not repair existing surface damage or remove the need to maintain the paving beneath them.
Portability is another benefit. HeatTrak’s residential mats roll out and plug in without tools or permanent installation. You can put them out for snowy weather and store them afterward, rather than installing a heating system within the walkway itself.
Power and Safety
Residential HeatTrak mats use standard 120V household outlets with a NEMA 5-15 connection. A Power Unit with an integrated ground-fault circuit interrupter, or GFCI, connects the mats to the outlet. The GFCI shuts off power if it detects current leakage over 6 mA.
One HeatTrak Power Unit handles up to 13 amps of mats. Add up the amperage of the mats you intend to connect and stay within that limit. A connected layout needs to fit the Power Unit’s capacity, even when additional mats would physically fit the route.
HeatTrak mats are tested to UL 499 and carry a TUV mark. They have a two-year manufacturer warranty. These mats are for outdoor use only; do not use them indoors, and never cover them.
Tips for Using Heated Snow Melting Mats
- Turn them on before snow arrives. Starting heated snow melting mats before snowfall lets them begin melting flakes as they land.
- Plan how you will control power. Use a switched outlet, timer, smart outlet, or snow sensor controller suited to the mat system and its electrical load. Controllers with temperature and moisture sensors can switch mats on only when needed.
- Keep mats uncovered. Never place another mat or any other covering over them.
- Clean them in spring. Use mild dish detergent and a soft brush for seasonal cleaning.
- Store them carefully. Store mats flat or rolled as packaged, with the grit side facing out. Choose a storage location away from children and pets.
Questions?
Planning a heated path to your backyard sauna? Call Backyard America at 888-596-4403.